Blue-White Industries - F-300 Series, 4" PVC FlowMeter - 125 TO 500 GPM - F-30400P
- Brand
- Blue-White Industries
- SKU:
- 28-0470
- Weight:
- 1.00 LBS
- Shipping:
- Calculated at Checkout
4 Great reasons to buy from us:
Blue-White Industries - FlowMeter, F-300 Series, 4" Copper FlowMeter - 125 TO 500 GPM - F-30400P
Pipe sizes: 1″, 1¼″, 1½″, 2″, 2½″, 3″, 4″, 6″, 8″
F-300 series are the BEST flowmeters made specifically for Pool and Sap applications. Flowmeters are installed after the filtration system in commercial pool applicaitons. This enables the service person to tell at a glance if the recirculating pump is pushing an adequate amount of water to ensure water turnover. The 300 series flowmeters are available in configurations for both horizontal and vertical mount installations in closed pipe systems. Please specificy type of pipe - copper or PVC.
Please specify top mount - side mount - vertical up - vertical down flow.
Model Variations:
- F-300 = Horizontal flow
- D-300 = Vertical down flow
- U-300 = Vertical up flow
- NSF 50 LISTED 1”, 1.25”, 1.5”, 2” (L2), 2.5”, 3”, 4”, and 6” (L3) – Horizontal flow only
- Well suited for closed pipe installations
- Easy to read dual scale (GPM / LPM), screen printed on both sides of the meter body
- Acceptable for outdoor installations (direct sunlight okay)
- Pitot Tube (impact tube) design makes it easy to install on existing pipe
- One piece, machined acrylic meter body, annealed for added strength and chemical resistance
- Included SS clamps and gasket seal
- Standard and Low Flow options available
- For use on PVC or Copper Pipes (refer to literature)
| Pipe Sizes: | Horizontal Installation: 1″, 1¼″, 1½″, 2″, 2½″, 3″, 4″, 6″, 8″ Vertical Installation: 1½″, 2″ |
| Max. Working Pressure: | 75 PSI (5.17 bar) @ 70??£F (21??£C) |
| Max. Fluid Temperature: | 190??£F / 88??£C @ 0 PSI |
| Full Scale Accuracy: | Old Style F-300: +/- 10% NEW F-300 Sizes: 1″, 1.25″, 1.5″, 2″, 2.5″, 3″, 4″, 6″, 50mm, 63mm horizontal +/- 5% (when installed with 5x pipe ID min. inlet pipe length / 2x pipe ID min outlet pipe length) +/- 2% (when installed with 10x pipe ID min. inlet pipe length / 5x pipe ID min outlet pipe length) |
| Meter Body Material: | Acrylic |
| Gasket Material: | Neoprene |
| Float Material: | 316 SS (PTFE low flow units) |
| Connection Type: | Saddle |
| Pipe Capability: | PVC Schedule 40 and Schedule 80 (12% higher reading on sch 80 pipe) Copper Tube Type “K” and “L” |
| Approx. Shipping Weight: | 1” to 4” Pipe: 1 lb. (.454kg) 6” and 8″” Pipe: 2 lb. (.907 kg) |
Additional Information
Data Sheet
Instruction Manual
Please call for questions or technical assistance! 714-564-9100
