Sidebar
Warranty
California Energy Commission (CEC) CEC Title 20 Section 1605.3(g)(5) requires any motor used for residential filter pump applications and manufactured before July 19, 2021 that is greater than or equal to 1.0 THP be replaced with a two-speed or variable speed motor. Effective July 19, 2021 CEC Title 20 1605.3(g)(6) requires any motor used for replacement dedicated-purpose pool pump motor on all residential and commercial applications and manufactured on or after July 19, 2021 that is greater than or equal to 0.5 THP be replaced with a variable speed motor.
This motor can not be sold in California.
Centurion Pro Motor - 2.25 THP / C-Frame - 115/208-230 Volts - HST225
Features:
- 48 and 56 Frame sizes available
- Black and popular almond color options
- Durable and easy-to-install
- Triple Seal™ Protection on pump-end bearing protects the bearing from water, pests and debris, extending the life of the motor
- Fast and easy installation with the open and accessible terminal board and wiring compartment
- Long lasting
- Designed for optimal performance and efficiency
- Easy voltage change device
- Premium sealed 203 bearings at both ends
- Centurion PRO Motor – For Pool Pros Only
- Most durable and economical solution in the market today
- Definitive shaft access (7/16” wrench)
- Auto protector
- UL 1081 design
- 60 Hz
- 50(insert degree symbol) C ambient
- Open dripproof
Benefits:
- Durable and easy to install, no other replacement pump motor comes close to a superbly crafted Centurion® PRO pool and spa motor. The new Triple Seal™ protection feature is designed into the pump end of the motor to protect the bearings from water, pests and debris, extending the life of the motor. Now available in 48 and 56 frame sizes. Black and the popular almond color options.
Triple Seal Protection
Triple Seal protection was developed and patented by Regal's innovative engineering staff to combat premature motor failures associated with pump end bearing failures due to water ingress. Triple seal protection is a robust design that protects the pump end bearing on both the outboard and inboard facing seal of the bearing using three distinct sealing systems (See image below). While triple seal protection is designed to protect the pump end bearing from general water ingress, dust and debris, it is not designed to protect against leaky pump seals, constant spray from irrigation systems, or other extraneous conditions. Triple seal protection is another line of defense from moisture intrusion into the pump end bearing system.
General Specifications
Model : | HST225 | Catalog No : | HST225 |
Part Description : | MODEL-PFHP-48FR | Category : | Induction Motors |
Stock : | Yes |
Nameplate Specifications
Output HP : | 2.25 Hp | Output KW : | 1.7 kW |
Frequency : | 60 Hz | Voltage : | 208-230/115 V |
Current : | 10.9-10.2/20.4 A | Speed : | 3450 rpm |
Service Factor : | 1 | Phase : | 1 |
Duty : | Continuous | Insulation Class : | B |
Frame : | 56J | Enclosure : | Open Drip Proof |
Overload Protector : | Automatic | Ambient Temperature : | 50 °C |
UL : | Recognized | CSA : | Y |
Technical Specifications
Electrical Type : | Capacitor Start Capacitor Run | Poles : | 2 |
Rotation : | Counterclockwise Pump End | Mounting : | Round |
Motor Orientation : | Horizontal | Drive End Bearing : | BALL |
Opp Drive End Bearing : | BALL | Frame Material : | Rolled Steel |
Shaft Type : | Threaded | Overall Length : | 16.24 in |
Frame Length : | 9.50 in | Shaft Diameter : | 0.625 in |
Shaft Extension : | 2.562 in | UPC : | 786674070319 |
Weight : | 32.00 LB |