Sidebar
California Energy Commission (CEC) CEC Title 20 Section 1605.3(g)(5) requires any motor used for residential filter pump applications and manufactured before July 19, 2021 that is greater than or equal to 1.0 THP be replaced with a two-speed or variable speed motor. Effective July 19, 2021 CEC Title 20 1605.3(g)(6) requires any motor used for replacement dedicated-purpose pool pump motor on all residential and commercial applications and manufactured on or after July 19, 2021 that is greater than or equal to 0.5 THP be replaced with a variable speed motor.
This motor can not be sold in California.
Century Motors - E-Plus, Square Flange, Threaded Shaft, Tan Motor - 1.65 HP, 115/230 Volts - HBQ165
Total HP = 1.65
Replaces Pentair motor 350010S, WFE4, WFE26, SuperFlo EE 1.5, Century BPA450V1
Features
- Long lasting with Triple Seal™ protection to prevent water and debris intrustion
- Fast and easy installation with the open and accessible terminal board and wiring compartment
- Premium sealed 203 bearings both ends
- Definitive shaft access (7/16” wrench)
- Voltage change device
- Open dripproof
- Designed for optimal performance and efficiency
- Most durable and economical solution in the market today
- Popular ALMOND color
General Specifications
UPC: | 786674071415 | Weight: | 16 LB |
Packaged Length: | 15.98 | Packaged Width: | 9.13 |
Packaged Height: | 9.13 |
Nameplate Specifications
Output HP: | 1.65 Hp | Output KW: | 1.2 kW |
Frequency: | 60 Hz | Voltage: | 230/115 V |
Current: | 8.0/16.0 A | Speed: | 3450 rpm |
Service Factor: | 1 | Phase: | 1 |
Duty: | Continuous | Insulation Class: | F |
Frame: | Y56Y | Enclosure: | Drip Proof |
Thermal Protection: | Thermally Protected | Ambient Temperature: | 50 °C |
UL: | Recognized | CSA: | Y |
Technical Specifications
Electrical Type: | Permanent Split Capacitor, Single Or Dual Voltage | Poles: | 2 |
Rotation: | Counterclockwise Pump End | Mounting: | Round |
Motor Orientation: | Horizontal | Drive End Bearing: | Ball |
Opp Drive End Bearing: | Ball | Frame Material: | Rolled Steel |
Shaft Type: | 1/2 Threaded | Overall Length: | 13.42 in |
Frame Length: | 8.65 in | Shaft Diameter: | 0.625 in |
Shaft Extension: | 0.91 in |
Additional Information
Century Product Catalog
Warranty