Chemtrol - Membrane Total Chlorine Sensor ( PPMTC010 – 0-010PPM )

Chemtrol - Membrane Total Chlorine Sensor  ( PPMTC010 – 0-010PPM )

Description:

Unlike other chlorine sensors on the market, our solid state sensor features superior precision and control of free chlorine levels, with industry-leading reliability and low maintenance requirements.

FREE CHLORINE measurement (same as DPD #1) in ppm or mg/l including:

– free chlorine (HOCl and OCL-) and
– chlorinated isocyanurates if present,

• pH RANGE of 5.5 to 9.5,
• TEMPERATURE RANGE of 5 to 50C (40 to 120 F)
• CYANURIC ACID compatible,
• PRESSURE RANGE up to 3 bar (45 psi),
• PVC BODY with 1-in MPT fitting,
• REPLACEABLE MEMBRANE,
• SENSOR CELL with specially designed probe housing,
• EASY CALIBRATION on start-up.

Maintenance and Warranty

There is no special maintenance requirements except to make sure that the membrane remains clean and to remove the sensor to prevent freezing in winter.

The sensor is covered with a standard manufacturer’s warranty of 2 years. Under proper water conditions, the membrane should last 1-2 years. Do not reuse the membrane if removed. Replace with new membrane.

Sensor Cell Installation

Additional Information:

Chlorine Sensors

Maintenance and Warranty