HS-1 SL One-Part - Fast Setting - Deck-O-Seal 32 oz - Tan
- Brand
- WR Meadows
- SKU:
- 16-0529
- Weight:
- 4.70 LBS
- Shipping:
- Calculated at Checkout
4 Great reasons to buy from us:
One-Part - Fast Setting - Deck-O-Seal - Tan
HS-1 SL is a one-part, self-leveling hybrid sealant, developed with silyl-modified polymer (SMP) technology. It cures under the influence of atmospheric moisture to form a medium modulus sealant with excellent adhesive properties and resistance to ageing and weathering.
HS-1 SL
One-Part, Self-Leveling, SMP-Based Sealant
DESCRIPTION
HS-1 SL is a one-part, self-leveling hybrid sealant, developed with silyl-modified polymer (SMP) technology. It cures under the influence of atmospheric moisture to form a medium modulus sealant with excellent adhesive properties and resistance to ageing and weathering.
USES
HS-1 SL can be used in movement and connection joints. Ideal applications include indoor and outdoor pool decks subject to pedestrian traffic.
FEATURES/BENEFITS
- One part – no mixing is needed on site.
- Self-leveling.
- Supplied in convenient pouches – no tooling or caulk gun needed.
- Pouch can be resealed.
- Allows movement capability of 25%.
- Cures bubble-free.
- Adheres to green concrete and damp surfaces.
- Adheres well to most construction materials.
- Is permanently elastic over a wide range of temperatures.
- Resists chlorinated water splashes.
- Non-gassing.
- VOC-compliant.
PACKAGING
32 Oz. (946.4 mL) Pouches (6/Carton)
COVERAGE
Approximate number of lineal feet that can be sealed with 32 oz. (946.4 mL) HS-1 SL pouch.
Width of Joint
| Depth of Joint | 1/4″ | 3/8″ | 1/2″ | 5/8″ | 3/4″ | 7/8″ | 1″ |
| 1/4″ | 77 | 51 | 35 | 31 | 26 | 22 | 19 |
| 3/8″ | 34 | 26 | 21 | 17 | 15 | 13 | |
| 1/2″ | 19 | 15 | 13 | 11 | 10 |
SHELF LIFE
One year from date of manufacture. Store unopened product in a cool, dry place under 80° F (27° C).
TECHNICAL DATA
| Available Colors: | Gray, Tan |
| VOC Content: | 0 g/L |
| Skin-Time: | 15 – 30 Minutes |
| Tack-Free Time: | 45 – 90 Minutes |
| Cure Time: | ¼” (6.4 mm) bead per 24 hours |
Times listed above may vary depending on temperature and humidity during and after application.
APPLICATION
Surface Preparation … Surfaces must be clean, free of oil, grease or rust and of sound quality. Remove all loose particles or residues with a jet of compressed air, sandpaper, or hard brush. Glass, metal, and other non-porous surfaces must be free of any coatings and wiped clean with solvent.
Priming … For optimum adhesion and/or joints over 1″ in width, P/G PRIMER, is recommended.
Cleanup … Clean tools with solvent or alcohol immediately after use. Cured material can only be removed mechanically.
PRECAUTIONS
Do not use in underwater applications.
Please call for questions or technical assistance! 714-564-9100
Additional Information
SDS Sheet
Data Sheet
