Mer-Made Fiberglass Strainers with s.s. Basket - 12" Standard FO Series Strainer

Mer-Made Fiberglass Strainers w/s.s. Basket - 12" Standard FO Series Strainer

Fiberglass body, transparent acrylic lid, 316 stainless steel v-wire baskets. Strainers may be ordered in a variety of configurations. T-Style - Straight through strainer style. FO-Style - Standard or Standard reducing - Concentric or Eccentric Reducing. Strainers are supplied with flanged connections drilled to 150 lbs. ANSI standard.

Mer-Made FO Series strainers have been designed to achieve lower pressure losses and higher debris holding capacity. These units have been tested for pressure loss (clean basket). In addition, tests were run using grass clippings as a medium to establish a comparison between "dirty-up" time for our design versus the standard designs being offered by competitors. Mer-Made FO Series (full outlet) strainers are built with a large outlet area in the basket chamber. Historically, strainers have been required to have a basket total open area that is a multiple of incoming pipe area. A typical code or specification may call for a basket open area to be four times the incoming pipe area. Tests have shown, however, that in many designs very little of the basket area is used before a maximum pressure loss, (say 5 psi) is achieved. The usefulness of the strainer basket is much more dependent on the amount of opening in the chamber that houses the basket.

Please call for questions or technical assistance! 714-564-9100

Additional Information

Spec Sheet

Brochure