PARAGON AQUATICS PBS01 Stark Para-Pump Booster System
- Brand
- Paragon Aquatics
- SKU:
- 24-1315
- Weight:
- 65.00 LBS
- Shipping:
- Calculated at Checkout
4 Great reasons to buy from us:
PARA-PUMP BOOSTER SYSTEM™ PBS01 SERIES
The PBS is a device is used to increase the pressure of clean filtered water from a filter system or a supply source (non-filtered). For the purpose of supplying consistent usable pressure for the actuation of the filter systems backwash valves.
The PBS is designed to operate during the filter systems backwash cycle only. A pre set pressure switch allows the PBS to operate on a “as needed” basis. Upon initiation of a backwash cycle the PBS is activated manually (by way of an on/off switch, supplied by others) or automatically with a Stark Automatic Controller (A 24 VAC N/O Relay is required, supplied by others).
Product Components
-
1/2 HP pump and motor, 115/230 VAC, 1 phase, 60 cycle. The pump is factory wired for 115 VAC operation with pressure switch factory calibrated for 35 psi shut-off for intermittent operation (B4301).
-
Hydro pneumatic tank (B4302).
-
Check Valve Assembly (B4303).
-
Tee assembly (B4304)
-
100 feet of 3/8" tubing and all necessary tubing fittings for connection to the filter system.
-
Anchoring Hardware (3/8” x 2 1/2” lag bolts, 3/8” flat washers and anchor shields, Qty: 2 each)
