Type A-2 Premium Rubber-Based Pool Paint
This premium rubber coating is formulated to provide excellent hiding, coverage, and protection. It restores and upgrades previously painted chlorinated rubber and synthetic rubber surfaces. It is VOC Compliant for all 50 states and Canada
Before You Paint
Proper preparation is required to achieve the desired finish you expect. Let us help you determine which product to use, how much will be needed and how to properly apply the coating. Additionally, surface preparation is one of the most important steps in painting a pool. Find the steps for proper surface preparation HERE.
Facts: |
|
Application: | Roller/Brush/Spray |
Mixing: | Mechanically mix |
Coverage: | Up to 400 sq. ft./gallon on recoats |
Fill Time-Indoor: | 10 days |
Fill Time-Outdoor: | 5 dry days |
Clean-up: | Ramuc Thinner |
Notes: |
|
Spray Information: Airless: 2000—2500 p.s.i. Tip Size: .(0.33—0.43 mm)
Coverage: Approximately 325 sq. ft. per gallon on previously painted chlorinated rubber pools (Actual coverage will vary and is dependent upon the texture and profile of the surface.)
Minimum dry film per coat: 1.0 mils dry (2.3 mils wet)
Maximum dry film per coat : 2.0 mils dry (4.7 mils wet)
Clean up : Ramuc Thinner
Additional Information
Product Brochure
Quick Reference Guide
Tech Sheet
SDS Sheet