DS Acrylic Pool Paint
This acrylic coating is formulated to offer all the advantages of water-based technology. It can be applied over most previously painted surfaces and in damp environments.
DS offers advantages over traditional solvent-based paints. DS Acrylic can be applied to damp surfaces and previously painted chlorinated and synthetic rubber surfaces. Use of DS allows the pool to be filled within 3 days after the final application of paint. Acrylic coatings such as DS are used when short down times are critical. Water-based acrylics are extremely color-fast and UV resistant.
Before You Paint
Proper preparation is required to achieve the desired finish you expect. Let us help you determine which product to use, how much will be needed and how to properly apply the coating. Additionally, surface preparation is one of the most important steps in painting a pool. Find the steps for proper surface preparation HERE.
Facts: |
|
Application: | Roller/Brush/Spray |
Mixing: | Mechanically mix |
Coverage: | Up to 300 sq. ft./gallon on recoats |
Fill Time-Indoor: | 6 days |
Fill Time-Outdoor: | 3 dry days |
Clean-up: | Soap and Water |
Notes: |
|
Coverage: 350-400 sq. ft. on previously painted surfaces (Actual coverage will vary and is dependent upon the texture and profile of the surface)
Minimum dry film per coat 1.2 mils dry (3.4 mils wet)
Maximum dry film per coat: 1.4 mils dry (4.0 mils wet).
Clean up: Soap & Water
Additional Information
Product Brochure
Tech Sheet
Quick Reference Guide
SDS Sheet