EP Epoxy High Gloss Epoxy Pool Paint
EP Epoxy cures to a hard, tough, durable finish, providing stain, chemical and abrasion resistance for protection of concrete, plaster and fiberglass swimming pools, spas and slides.
EP Epoxy cures to a high gloss-finish with excellent coverage rates, especially on previously painted epoxy surfaces. EP Epoxy has been a proven performer for more than 50 years. Because of their chemical cure, epoxies are the paints of choice for indoor pools.
High solids, high gloss epoxy pool paint
For bare concrete, fiberglass, plaster and previously painted epoxy.
Up to 3 years service life
Great for Koi ponds, hot tubs, spas and fountains.
Before You Paint
Proper preparation is required to achieve the desired finish you expect. Let us help you determine which product to use, how much will be needed and how to properly apply the coating. Additionally, surface preparation is one of the most important steps in painting a pool. Find the steps for proper surface preparation HERE.
Facts: |
|
Application: | Roller/Brush/Spray |
Mixing: | Mechanically mix |
Coverage: | Up to 450 sq. ft./gallon on recoats |
Fill Time-Indoor: | 10 days |
Fill Time-Outdoor: | 5 dry days |
Clean-up: | Ramuc Thinner |
Notes: |
|
Coverage: 175—200 sq. ft. per gallon kit on bare, sand blasted or rough surfaces
400-450 sq. ft. per gallon kit on re-coats (Actual coverage will vary and is dependent upon the texture and profile of the surface.)
Minimum dry film per coat: 1.7 mils dry (2..9 mils wet)
Maximum dry film per coat : 2.0 mils dry (5.7 mils wet)